The steps for installation are simple. Our mount is designed to replace the factory wedge mount, so the directions for installation are the same except that we utilize solid brass inserts to mount the camera plate to our angled mount. Factory wedge mounts typically sandwich the mount between the doorbell mounting plate and the wall anchors.
To install your mount.
1. Install the mount to the wall. (Anchors are included but may not be required for your installation. Construction screws can be substituted if desired)
2. Feed your wiring from the wall through the mount.
3. Install the camera mounting plate onto the doorbell angled mount using the included stainless steel hardware.
4. Connect the wiring per the manufacturers installation instructions.
5. Install the camera into the mounting plate.